Skip to main content
Skip header

Mechanics of Materials

* Exchange students do not have to consider this information when selecting suitable courses for an exchange stay.

Course Unit Code330-2003/01
Number of ECTS Credits Allocated5 ECTS credits
Type of Course Unit *Compulsory
Level of Course Unit *First Cycle
Year of Study *Second Year
Semester when the Course Unit is deliveredWinter Semester
Mode of DeliveryFace-to-face
Language of InstructionCzech
Prerequisites and Co-Requisites Course succeeds to compulsory courses of previous semester
Name of Lecturer(s)Personal IDName
SLA20Dr. Ing. Ludmila Adámková
FRY72prof. Ing. Karel Frydrýšek
FOJ08doc. Ing. František Fojtík, Ph.D.
LIC098Ing. Mgr. Dagmar Ličková, Ph.D.
Summary
This subject teaches the basics terms of mechanics of deformed bodies. Basic types of tensions (i.e. tension, pressure, bending, torsion, buckling, limit states) for statically determinate and indeterminate cases. Discussed issue is in the branch of linear elasticity and gives skills applied for the design and assessment of simple technical structures.
Learning Outcomes of the Course Unit
To teach the students the basic procedures and methods applied for the solution of technical problems of strength and elasticity (i.e. mechanics of materials). To ensure the understanding of teaching problems. To apply the gained skills in practice.
Course Contents
1. Second moment of area (gravity centre)

2. Second moment of area (section modulus)

3. Introduction to mechanics of elastic bodies.

4. Simple stress and stain (tensile and compression)

5. Tensile, compression. Trusses evaluation.

6. Tensile, compression. Statically determinate problems.

7. Tensile, compression. Statically undeterminate problems.

8. Torsion of hollow shaft.

9. Torsion of hollow shaft. Statically undeterminate problems.

10. Simple bending theory. Shearing force, bending moment.

11. Simple bending theory. Stress evaluation.

12. Simple bending theory. Slope and deflection of beams.

13. Simple bending theory. Castigliano theorem.

14. Simple bending theory. Castigliano theorem. Statically undeterminate problems

15. Simple bending. Beam with broken axis.

16. Simple bending. Beam with broken axis. Statically determinate problems.

17. Simple bending. Beam with broken axis. Statically undeterminate problems.

18. Multiaxial stress. Principal stress. Mohr circle.

19. Theory of elastic failure.

20. Combined loading. Tension (compression) and bending.

21. Combined loading. Bending and torsion.
Recommended or Required Reading
Required Reading:
[1] HÖSCHL, C.: Pružnost a pevnost ve strojnictví, SNTL, Praha, 1971, pp. 376.
[2] KRČÁL, O.: Příklady z pružnosti a pevnosti I, část 1, VŠB-TU Ostrava, 1994, ISBN 80-7078-243-9.
[3] KRČÁL, O., FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Příklady z pružnosti a pevnosti 1 (část 2), VŠB-TU Ostrava, Ostrava, ISBN 978-80-248-1826-9, Ostrava, 2008, pp. 124.
[4] LENERT, J.: Pružnost a pevnost I, 1. vyd., VŠB-TU Ostrava, 1998, ISBN 80-7078-392-3.

[5] FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Mechanics of Materials 1 - Extended Edition (Introduction, Simple Stress and Strain, Basic of Bending), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, Ostrava, 2008, Czech Republic, pp. 203.
[6] FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Mechanics of Materials 1 (Introduction, Simple Stress and Strain, Basic of Bending), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, ISBN 978-80-248-1550-3, Ostrava, 2007, Czech Republic, pp. 179.
[7] FRYDRÝŠEK, K., LENERT, J.: Mechanics of Materials, VŠB-TU Ostrava, 2005, ISBN 80-248-08006-4, pp. 63.
[1] HÖSCHL, C.: Pružnost a pevnost ve strojnictví, SNTL, Praha, 1971, pp. 376.
[2] KRČÁL, O.: Příklady z pružnosti a pevnosti I, část 1, VŠB-TU Ostrava, 1994, ISBN 80-7078-243-9.
[3] KRČÁL, O., FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Příklady z pružnosti a pevnosti 1 (část 2), VŠB-TU Ostrava, Ostrava, ISBN 978-80-248-1826-9, Ostrava, 2008, pp. 124.
[4] LENERT, J.: Pružnost a pevnost I, 1. vyd., VŠB-TU Ostrava, 1998, ISBN 80-7078-392-3.
[5] FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Mechanics of Materials 1 - Extended Edition (Introduction, Simple Stress and Strain, Basic of Bending), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, Ostrava, 2008, Czech Republic, pp. 203.
[6] FRYDRÝŠEK, K., ADÁMKOVÁ, L.: Mechanics of Materials 1 (Introduction, Simple Stress and Strain, Basic of Bending), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, ISBN 978-80-248-1550-3, Ostrava, 2007, Czech Republic, pp. 179.
[7] FRYDRÝŠEK, K., LENERT, J.: Mechanics of Materials, VŠB-TU Ostrava, 2005, ISBN 80-248-08006-4, pp. 63.
Recommended Reading:
[8] HÁJEK,E.-REIF,P.-VALENTA,F.: Pružnost a pevnost I, SNTL Praha, 1988.
[9] KUBA, F.: Pružnost a pevnost (základní část), VŠB-TU Ostrava, 5. vydání, 1990, pp. 385.
[10] LENERT, J.: Pružnost a pevnost II, 1. vyd., VŠB-TU Ostrava, 1998, ISBN 80-7078-572-1.
[11] MIROLJUBOV, I., N. a kol.: Řešení úloh z pružnosti a pevnosti, SNTL Praha, 1976.
[12] PEŠINA, E., REIF, P., VALENTA, F.: Sbírka příkladů z pružnosti a pevnosti, SNTL Praha, 1964.
[13] SMÍŘÁK, S.: Pružnost a plasticita I pro distanční studium, Fakulta stavební VÚT v Brně, Akademické nakladatelství CERM, s.r.o., 1999, ISBN 80-214-1151-1, pp. 210.
[14] TIMOŠENKO, Š, P.: Pružnost a pevnost I, Technicko – vědecké vydavatelství, Praha, 1951.
[15] TIMOŠENKO, Š, P.: Pružnost a pevnost II, Technicko – vědecké vydavatelství, Praha, 1951.
[16] TREBUŇA, F., ŠIMČÁK, F., JURICA, V.: Pružnosť a pevnosť I, VIENALA Košice, 2000, Slovensko, ISBN 80-7099-477-0.
[17] TREBUŇA, F., ŠIMČÁK, F.: Odolnosť prvkov mechanických sústav, Edícia odbornej a vedckej literatúry, Technická univerzita v Košiciach, Košice, 2004, Slovensko, ISBN 80-8073-148-9.
[18] TREBUŇA, F., ŠIMČÁK, F., JURICA, V.: Pružnosť a pevnosť II, VIENALA Košice, 2000, Slovensko, ISBN 80-7099-478-9.
LZE POUŽÍT RŮZNÉ SKRIPTA, UČEBNICE I INTERNETOVÉ PODKLADY Z JINÝCH ŠKOL !!!
[8] HÁJEK,E.-REIF,P.-VALENTA,F.: Pružnost a pevnost I, SNTL Praha, 1988.
[9] KUBA, F.: Pružnost a pevnost (základní část), VŠB-TU Ostrava, 5. vydání, 1990, pp. 385.
[10] LENERT, J.: Pružnost a pevnost II, 1. vyd., VŠB-TU Ostrava, 1998, ISBN 80-7078-572-1.
[11] MIROLJUBOV, I., N. a kol.: Řešení úloh z pružnosti a pevnosti, SNTL Praha, 1976.
[12] PEŠINA, E., REIF, P., VALENTA, F.: Sbírka příkladů z pružnosti a pevnosti, SNTL Praha, 1964.
[13] SMÍŘÁK, S.: Pružnost a plasticita I pro distanční studium, Fakulta stavební VÚT v Brně, Akademické nakladatelství CERM, s.r.o., 1999, ISBN 80-214-1151-1, pp. 210.
[14] TIMOŠENKO, Š, P.: Pružnost a pevnost I, Technicko – vědecké vydavatelství, Praha, 1951.
[15] TIMOŠENKO, Š, P.: Pružnost a pevnost II, Technicko – vědecké vydavatelství, Praha, 1951.
[16] TREBUŇA, F., ŠIMČÁK, F., JURICA, V.: Pružnosť a pevnosť I, VIENALA Košice, 2000, Slovensko, ISBN 80-7099-477-0.
[17] TREBUŇA, F., ŠIMČÁK, F.: Odolnosť prvkov mechanických sústav, Edícia odbornej a vedckej literatúry, Technická univerzita v Košiciach, Košice, 2004, Slovensko, ISBN 80-8073-148-9.
[18] TREBUŇA, F., ŠIMČÁK, F., JURICA, V.: Pružnosť a pevnosť II, VIENALA Košice, 2000, Slovensko, ISBN 80-7099-478-9.
LZE POUŽÍT RŮZNÉ SKRIPTA, UČEBNICE I INTERNETOVÉ PODKLADY Z JINÝCH ŠKOL !!!
Planned learning activities and teaching methods
Lectures, Individual consultations, Tutorials
Assesment methods and criteria
Task TitleTask TypeMaximum Number of Points
(Act. for Subtasks)
Minimum Number of Points for Task Passing
Credit and ExaminationCredit and Examination100 (100)51
        CreditCredit35 20
        ExaminationExamination65 16