Qualification Awarded | Master degree, Ing. |
---|
Level of Qualification | Second Cycle |
---|
Access to Further Studies | The graduates may continue in a Third cycle |
---|
Graduation Requirements | 120 ECTS Credits, Final state examination, Diploma thesis |
---|
Mode of Study | Full-time |
---|
Branch Director or Equivalent | Personal ID | Name |
---|
| KOL10 | doc. Ing. Kamil Kolarčík, CSc. |
Course Structure Diagram with ECTS Credits | 1. year / Winter semester | 1. year / Summer semester |
---|
| 30 ECTS Credits | 30 ECTS Credits |
| 2. year / Winter semester | 2. year / Summer semester |
| 30 ECTS Credits | 30 ECTS Credits |
Specific Admission Requirements |
---|
Specific admission requirements are determined by the Dean of the faculty. For more information please click here. |
Specific Arrangements for the Recognition of Prior Learning |
---|
Informal learning - max. 60% of credits gained in prior lifelong learning can be recognized, as determined by the Dean of the Faculty. |
Qualification Requirements and Regulations |
---|
Qualification Requirements: |
---|
Finished higher education in Bachelor's degree programme. |
Regulations: |
---|
The Czech educational system is regulated by the Higher Education Act (Act 111/1998). Studies at VSB-TUO are regulated by the Statute of VSB – Technical University of Ostrava. |
Profile of the Branch |
---|
The field covers the whole range of energy issues.
It acquaints students with the energy concept of the Czech Republic and presents it as one of the pillars of the production of both electricity and heat in the Czech Republic, as well as energy in compressed media, its accumulation ...
This will allow them to assess the choice of technology used in new energy sources according to the criterion of maximum energy efficiency and minimum harmful emissions. The cooperation of the Department of Energy of the Faculty of Mechanical Engineering with business companies, scientific workplaces and workplaces of cooperating universities both in the Czech Republic and abroad contributes to improving the quality of teaching.
In this area, the Department of Power Engineering of the Faculty of Mechanical Engineering is at the forefront of all Czech universities. The cooperation is aimed at achieving a high professional level of students, providing excursions and internships and modern equipment of research laboratories.
During the follow-up master's study program, the student gains a broad knowledge of energy transformation into electrical, thermal, pneumatic, ..., fluid mechanics, heat and mass transfer, combustion and knowledge of water management in energy, air protection and operation , regulation, diagnostics and maintenance in power engineering.
By choosing from a range of compulsory elective courses, it focuses on its chosen specialization, increasing its expertise and skills. |
Key Learning Outcomes |
---|
Key Lerning Outcomes are Expressed in following Structure: Knowledge, Skills, General competencies |
---|
Knowledge: |
---|
The aim of this field of study is to educate an engineer prepared for design, operation or management work in energy and environmental engineering and related fields.
His expertise in strength calculations of machine parts, thermal calculations of flowing and transforming media results in the operation of power generation units such as boilers, turbines, compressors, power stations, internal combustion engines, ... with maximum efficiency.
The other side of his expertise is accurate orientation in the latest PC programs, which he uses in the construction of new power components or complete power units. |
Skills: |
---|
Students will acquire professional skills for economic and ecological management of the dominant part of the Czech energy industry.
- Thermal energy equipment and industrial energy, heating, nuclear energy or the use of secondary energy sources, ...
- Alternative energy equipment, environmental techniques, ventilation and air conditioning, alternative and renewable energy sources and energy recovery of biomass and waste.
- Construction of steam boilers and thermal installations with thermal calculations, design and construction of steam boilers, materials and strength dimensioning of boiler parts or design methodology in the field.
- Nuclear power equipment, including thermal and hydraulic calculations, design and construction of nuclear power plant components. |
General competencies: |
---|
The aim of the study is to form a professional profile of a graduate who will work as a designer or. as an operator of energy facilities with knowledge of technical, economic and environmental categories.
Graduates are eligible for:
• in power engineering, development, design, construction, calculation, manufacturing, assembly and testing,
• in power plant and heating plant operation management,
• in the construction of thermal and nuclear energy,
• in institutions, institutions and state administration departments dealing with energy, safety and environmental care,
• for energy companies, including the possibility of self-employment (energy auditing, consulting and advisory services).
Here they are able to further educate and educate their co-workers at workplaces, they are able to communicate with their superiors as well as with the employees they lead.
An important part of their competence is the presentation of experience gained in professional circles. |
Occupational Profiles of Graduates with Examples |
---|
Graduates can obtain the EURING - EuroEngineering degree and can continue their doctoral studies in full-time or distance form.
In the labor market, these graduates are extremely interested, graduates easily find employment and work well in practice, be it design, operation or management.
At present, they also hold important positions in the management of large multinational companies such as executives, chairmen of boards of directors, boards of directors, etc. |
Examination Regulations, Assessment and Grading |
---|
Examination regulations, assesment and grading are described in the Study and Examination Rules. |
Curriculum: |
---|
Remark: |
Course block: Compulsory - all courses are compulsory. |
Course block: Choice-compulsory - student has to choose at least one course from the list of courses. |
Course block: Optional - student can choose any course from the list of courses. |
|
IMPORTANT: Student has to select so many courses to reach 30 ECTS credits per semester. Rules in detail and convenient selection of courses can be consulted with the programmme director. Bellow stated courses are assigned for the degree studies only. Students coming to VSB-TUO for an exchange stay must select courses from the List of courses for exchange students. |
|
1. Semester | 1. year | Winter semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0502/08 | Combustion Equipments | 4 ECTS credits |
361-0501/03 | Heat and Mass Transfer | 5 ECTS credits |
310-3141/01 | Mathematics IV | 5 ECTS credits |
361-0500/04 | Refrigeration Systems and Heat Pumps | 4 ECTS credits |
354-0524/04 | Robotics | 4 ECTS credits |
361-0520/03 | Water Management in Energetics | 4 ECTS credits |
Course Block: Choice-compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0540/01 | Hydro and Wind Power Plants | 4 ECTS credits |
361-0536/02 | Nuclear Power Eguipment | 4 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
713-0400/01 | Basic Winter Sports Course 1. master degree | 0 ECTS credits |
712-3501/01 | Economic and Cultural Life and Institutions of Russia I | 2 ECTS credits |
713-0401/01 | Physical education 1. master degree A | 0 ECTS credits |
352-0519/03 | Process Systems | 4 ECTS credits |
712-0403/01 | Professional German Conversation I | 2 ECTS credits |
300-0501/01 | Foreign study stay | 5 ECTS credits |
345-0525/01 | Rationalization of Production | 2 ECTS credits |
712-3101/01 | Company English I | 3 ECTS credits |
2. Semester | 1. year | Summer semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0522/03 | Chemistry in Energy Industry | 4 ECTS credits |
361-0507/05 | Compressors, Fans and Pumps | 5 ECTS credits |
361-0519/06 | Energy Accumulation and Economy | 4 ECTS credits |
361-0550/04 | Energy Utilisation of Biomass and Waste | 4 ECTS credits |
338-0546/07 | Modeling of fluid flow with heat transfer | 4 ECTS credits |
361-0537/03 | Steam Generators I | 5 ECTS credits |
Course Block: Choice-compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0530/01 | Combustion Turbines and Engines | 4 ECTS credits |
361-0572/07 | Materials and Dimensioning of Steam Boilers | 4 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
300-0501/01 | Foreign study stay | 5 ECTS credits |
345-0525/01 | Rationalization of Production | 2 ECTS credits |
713-0444/01 | Basic Summer Sports Course 1.master degree | 0 ECTS credits |
310-3140/01 | Compendium of Mathematics IV | 1 ECTS credits |
712-3502/01 | Economic and Cultural Life and Institutions of Russia II | 2 ECTS credits |
310-3143/01 | Partial Differential Equations | 4 ECTS credits |
713-0402/01 | Physical education 1. master degree B | 0 ECTS credits |
712-0404/01 | Professional German Conversation II | 2 ECTS credits |
712-3102/01 | Company English II | 3 ECTS credits |
3. Semester | 2. year | Winter semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0523/04 | Construction Exercise | 7 ECTS credits |
361-0513/01 | Excursion | 0 ECTS credits |
361-0514/06 | Heating Stations and Energy Networks | 5 ECTS credits |
361-0515/06 | Operation and Regulation of Energy Equipments | 5 ECTS credits |
361-0539/01 | Steam Turbines | 5 ECTS credits |
Course Block: Choice-compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0506/05 | Air Protection in Industry | 4 ECTS credits |
229-0272/01 | Environment Techniques | 4 ECTS credits |
361-0525/03 | Soft skills, collaboration with praxis or abroad | 4 ECTS credits |
361-0524/04 | Solar Energy and Fuel Cells | 4 ECTS credits |
361-0538/01 | Steam Generators II | 4 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
713-0500/01 | Basic Winter Sports Course 2. master degree | 0 ECTS credits |
354-0500/02 | CAD II | 4 ECTS credits |
713-0601/01 | Physical education 2. master degree A | 0 ECTS credits |
352-0544/02 | Programming Tools | 4 ECTS credits |
300-0601/01 | Foreign Study Stay | 5 ECTS credits |
712-3101/01 | Company English I | 3 ECTS credits |
4. Semester | 2. year | Summer semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
361-0517/02 | Diploma Project | 20 ECTS credits |
342-0657/01 | Equipments of Processing Plant | 4 ECTS credits |
410-8301/01 | Rotating Electrical Machines | 4 ECTS credits |
Course Block: Choice-compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
711-0522/06 | Communication Skills | 2 ECTS credits |
711-0609/05 | Fundamentals of Social Manners - Etiquette | 2 ECTS credits |
711-0505/04 | Legal and Psychological Issues | 2 ECTS credits |
711-0527/02 | Soft Skills I | 2 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
300-0601/01 | Foreign Study Stay | 5 ECTS credits |
713-0602/01 | Physical education 2. master degree B | 0 ECTS credits |
342-0660/03 | Selected lectures from the construction of racing vehicles | 2 ECTS credits |
338-0527/02 | Turbulence | 3 ECTS credits |
712-3102/01 | Company English II | 3 ECTS credits |