Qualification Awarded | Master degree, Ing. |
---|
Level of Qualification | Second Cycle |
---|
Access to Further Studies | The graduates may continue in a Third cycle |
---|
Graduation Requirements | 120 ECTS Credits, Final state examination, Diploma thesis |
---|
Mode of Study | Full-time |
---|
Branch Director or Equivalent | Personal ID | Name |
---|
| NEM25 | prof. Dr. Ing. Miloš Němček |
Course Structure Diagram with ECTS Credits | 1. year / Winter semester | 1. year / Summer semester |
---|
| 30 ECTS Credits | 30 ECTS Credits |
| 2. year / Winter semester | 2. year / Summer semester |
| 30 ECTS Credits | 30 ECTS Credits |
Specific Admission Requirements |
---|
Specific admission requirements are determined by the Dean of the faculty. For more information please click here. |
Specific Arrangements for the Recognition of Prior Learning |
---|
Informal learning - max. 60% of credits gained in prior lifelong learning can be recognized, as determined by the Dean of the Faculty. |
Qualification Requirements and Regulations |
---|
Qualification Requirements: |
---|
Finished higher education in Bachelor's degree programme. |
Regulations: |
---|
The Czech educational system is regulated by the Higher Education Act (Act 111/1998). Studies at VSB-TUO are regulated by the Statute of VSB – Technical University of Ostrava. |
Profile of the Branch |
---|
Branch Design and Process Engineering consists of six specializations. These specializations cover an area of a design and calculations both machines and their parts and groups. Besides this fundamental area problems of machine drives both mechanical and hydraulic or pneumatic are studied in this branch. It is possible to acquire knowledge of a transport and materials handling, earthwork and construction machines. Maintenance and diagnostic problems are considering for all of these machinery. The all study is highly competent and the latest findings are applied in. Top procedures and optimization methods are used for designing and calculations. The usage of latest 3D CAD applications and FEM systems is a matter of fact. Branch graduates will learn to manage these instruments on a professional level. They will carry out designs of machines and their parts with regard to their loading capacity and a demanded service life. They will become engineers in an individual specialization but at the same time their knowledge will be satisfactory in order to work as designers in other mechanical engineering branches. |
Key Learning Outcomes |
---|
Key Lerning Outcomes are Expressed in following Structure: Knowledge, Skills, General competencies |
---|
Knowledge: |
---|
Branch graduates, who have a further seven specializations, obtain information and knowledge from the branch of design and construction, operation, the maintenance and diagnostics of production machines and equipment. They obtain the principles and knowledge of methodical design and design theory with the use of computer aids. They gain deeper knowledge of pivotal disciplines of mechanical engineering as a broad base for innovators working in engineering and for other specialized growth through various forms of lifelong education. |
Skills: |
---|
Graduates of the masters study are characterized especially as designers, calculation specialists, and research and development staff. They gain special knowledge from the dynamics of fluid mechanisms, flow modeling, the control of hydraulic and pneumatic mechanisms and the design of hydraulic and pneumatic mechanisms. They complete designing exercises in the branch while independently working on their year project. |
General competencies: |
---|
Graduates develop their knowledge and skill in the design of machine parts, groups and mechanical equipment, applying the principles and knowledge of a methodical approach to design, design theory and thoroughly learn how to use comport equipment means and computer graphics in designing and constructing machines and equipment. They gain information and knowledge underlying practice work from the branch of designing and constructing machines and equipment. |
Occupational Profiles of Graduates with Examples |
---|
Graduates can find employment as calculation specialists, designers, development staff in design, designers in sections dealing with the construction of machines and equipment and in companies dealing with assembly, the operation and maintenance of hydraulic and pneumatic equipment, but also pumping equipment, pipeline distribution, lubricating equipment, testing areas and other areas. |
Examination Regulations, Assessment and Grading |
---|
Examination regulations, assesment and grading are described in the Study and Examination Rules. |
Curriculum: |
---|
Remark: |
Course block: Compulsory - all courses are compulsory. |
Course block: Choice-compulsory - student has to choose at least one course from the list of courses. |
Course block: Optional - student can choose any course from the list of courses. |
|
IMPORTANT: Student has to select so many courses to reach 30 ECTS credits per semester. Rules in detail and convenient selection of courses can be consulted with the programmme director. Bellow stated courses are assigned for the degree studies only. Students coming to VSB-TUO for an exchange stay must select courses from the List of courses for exchange students. |
|
1. Semester | 1. year | Winter semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
342-0505/01 | Design Practice I | 4 ECTS credits |
338-0523/02 | Fluid Mechanisms | 4 ECTS credits |
347-0501/01 | Machines Parts and Mechanisms III | 5 ECTS credits |
310-3141/01 | Mathematics IV | 5 ECTS credits |
354-0524/04 | Robotics | 4 ECTS credits |
330-0516/01 | Statics and Dynamics of Steel Constructions II | 4 ECTS credits |
342-0501/01 | Transport Machines Theory | 4 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
713-0400/01 | Basic Winter Sports Course 1. master degree | 0 ECTS credits |
712-3501/01 | Economic and Cultural Life and Institutions of Russia I | 2 ECTS credits |
713-0401/01 | Physical education 1. master degree A | 0 ECTS credits |
342-0664/01 | Praxis 1 | 1 ECTS credits |
352-0519/03 | Process Systems | 4 ECTS credits |
712-0403/01 | Professional German Conversation I | 2 ECTS credits |
300-0501/01 | Foreign study stay | 5 ECTS credits |
345-0525/01 | Rationalization of Production | 2 ECTS credits |
712-3101/01 | Company English I | 3 ECTS credits |
2. Semester | 1. year | Summer semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
330-0515/01 | Applied Mechanics | 4 ECTS credits |
342-0511/01 | Bulk Solid Mechanics | 5 ECTS credits |
342-0506/01 | Design Practice II | 4 ECTS credits |
338-0519/02 | Drives and Gears | 5 ECTS credits |
361-0550/04 | Energy Utilisation of Biomass and Waste | 4 ECTS credits |
342-0502/02 | Experimental Methods in Transportation | 4 ECTS credits |
347-0503/01 | Service Life Calculations of Machine Parts | 4 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
300-0501/01 | Foreign study stay | 5 ECTS credits |
345-0525/01 | Rationalization of Production | 2 ECTS credits |
713-0444/01 | Basic Summer Sports Course 1.master degree | 0 ECTS credits |
310-3140/01 | Compendium of Mathematics IV | 1 ECTS credits |
712-3502/01 | Economic and Cultural Life and Institutions of Russia II | 2 ECTS credits |
310-3143/01 | Partial Differential Equations | 4 ECTS credits |
713-0402/01 | Physical education 1. master degree B | 0 ECTS credits |
342-0665/01 | Praxis 2 | 1 ECTS credits |
712-0404/01 | Professional German Conversation II | 2 ECTS credits |
712-3102/01 | Company English II | 3 ECTS credits |
3. Semester | 2. year | Winter semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
342-0507/01 | Design Practice III | 5 ECTS credits |
342-0510/01 | Equipments of Processing Plant | 5 ECTS credits |
330-0517/01 | FEM Applications | 4 ECTS credits |
342-0656/01 | Innovation Processes | 5 ECTS credits |
342-0504/01 | Logistic Systems Planning | 6 ECTS credits |
342-0503/01 | Transport Complexes | 5 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
713-0500/01 | Basic Winter Sports Course 2. master degree | 0 ECTS credits |
354-0500/02 | CAD II | 4 ECTS credits |
713-0601/01 | Physical education 2. master degree A | 0 ECTS credits |
342-0666/01 | Praxis 3 | 1 ECTS credits |
352-0544/02 | Programming Tools | 4 ECTS credits |
300-0601/01 | Foreign Study Stay | 5 ECTS credits |
712-3101/01 | Company English I | 3 ECTS credits |
4. Semester | 2. year | Summer semester | 30 ECTS Credits |
Course Block: Compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
342-0508/01 | Design Practice IV | 8 ECTS credits |
342-0620/01 | Diploma Project | 20 ECTS credits |
Course Block: Choice-compulsory |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
711-0522/06 | Communication Skills | 2 ECTS credits |
711-0609/05 | Fundamentals of Social Manners - Etiquette | 2 ECTS credits |
711-0505/04 | Legal and Psychological Issues | 2 ECTS credits |
711-0527/02 | Soft Skills I | 2 ECTS credits |
Course Block: Optional |
---|
Code | Course unit title | Number of ECTS Credits Allocated |
---|
300-0601/01 | Foreign Study Stay | 5 ECTS credits |
713-0602/01 | Physical education 2. master degree B | 0 ECTS credits |
342-0667/01 | Praxis 4 | 1 ECTS credits |
342-0660/03 | Selected lectures from the construction of racing vehicles | 2 ECTS credits |
338-0527/02 | Turbulence | 3 ECTS credits |
712-3102/01 | Company English II | 3 ECTS credits |