HRABOVSKÁ, Kamila, Ondřej ŽIVOTSKÝ, Petra VÁŇOVÁ, Yvonna JIRÁSKOVÁ, Lucie GEMBALOVÁ a Ondřej HILŠER. Microstructure and magnetism of austenitic steels in relation to chemical composition, severe plastic deformation, and solution annealing.
Scientific Reports. Nature Publishing Group, 2025,
15(1), s. 2010(1)-2010(15). ISSN 2045-2322.
[Detail] BEDNARCZYK, Iwona, Anna DOBKOWSKA, Ondřej HILŠER, Stanislav RUSZ, Martin PASTRŇÁK, Radek ČADA, Magdalena JABŁOŃSKA, Marek TKOCZ, Karolina KOWALCZYK, Daria PALGAN, David NEČAS a Jarosław MIZERA. Influence of temperature and number of passes during twist channel angular pressing (TCAP) on the microstructural, mechanical, and corrosion properties of Mg-4Li-Ca.
Archives of Civil and Mechanical Engineering. Springer, 2024,
24(2), s. 1-15. ISSN 1644-9665.
[Detail] STAN-GLOWINSKA, Katarzyna, Lukasz ROGAŁ, Anna WÓJCIK, Ondřej HILŠER, Stanislav RUSZ, Miroslav GREGER a Wojciech MAZIARZ. Effect of twist-channel angular pressing on precipitation in Al-Mg-Zn-Ga alloys.
Journal of materials science. Springer, 2024,
59(10), s. 4324-4336. ISSN 0022-2461.
[Detail] SNOPIŃSKI, Przemysław a Ondřej HILŠER. Mechanism of Grain Refinement in 3D-Printed AlSi10Mg Alloy Subjected to Severe Plastic Deformation.
Materials. MDPI Open Access Publishing, 2024,
17(16), s. 1-13. ISSN 1996-1944.
[Detail] BALCERZAK, Maciej, Stanislav RUSZ, Radek ČADA, Martin PASTRŇÁK, Ondřej HILŠER a Miroslav GREGER. An Investigation into Sheet-Inconel 718 Forming with Flexible and Metal Tools - Simulation and Experiment.
Materials. MDPI Open Access Publishing, 2024,
17(June 2024), s. 1-24. ISSN 1996-1944.
[Detail] HILŠER, Ondřej, Martin PASTRŇÁK, Stanislav RUSZ, Hana KRUPOVÁ a Przemysław SNOPIŃSKI. Finite element analysis of twist channel angular pressing.
MM Science Journal. MM Publishing, 2023,
16(1), s. 6314-6318. ISSN 1803-1269.
[Detail] PASTRŇÁK, Martin, Stanislav RUSZ a Ondřej HILŠER. Microstructure evolution of AZ31 magnesium alloy during twist channel Angular Pressing.
MM Science Journal. MM Publishing, 2023,
16(1), s. 6319-6324. ISSN 1803-1269.
[Detail] SNOPIŃSKI, Przemysław, Matus KRYSZTOF, Ondřej HILŠER a Stanislav RUSZ. Effects of Built Direction and Deformation Temperature on the Grain Refinement of 3D Printed AlSi10Mg Alloy Processed by Equal Channel Angular Pressing (ECAP).
Materials. MDPI Open Access Publishing, 2023,
16(12), s. 1-15. ISSN 1996-1944.
[Detail] SNOPIŃSKI, Przemysław, Krzysztof MATUS a Ondřej HILŠER. Investigation of the effects of various severe plastic deformation techniques on the microstructure of laser powder bed fusion AlSi10Mg alloy.
Materials. MDPI Open Access Publishing, 2023,
16(23), s. 1-19. ISSN 1996-1944.
[Detail] SNOPINSKI, P, Ondřej HILŠER a Jiří HAJNYŠ. Tuning the defects density in additively manufactured fcc aluminium alloy via modifying the cellular structure and post-processing deformation.
Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. Lausanne: Elsevier Science SA, 2023,
865(February), s. nestránkováno. ISSN 0921-5093.
[Detail] SNOPIŃSKI, Przemysław, Michal KOTOUL, Jindřich PETRUŠKA, Stanislav RUSZ, Krysztof ZABA a Ondřej HILŠER. Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy.
Scientific Reports. Nature Publishing Group, 2023,
13(1), s. 1-16. ISSN 2045-2322.
[Detail] MAZIARZ, W., Miroslav GREGER, P. DŁUGOSZ, J. DUTKIEWICZ, A. WÓJCIK, Ł. ROGAL, K. STAN-GŁOWIŃSKA, Ondřej HILŠER, Martin PASTRŇÁK, Lubomír ČÍŽEK a Stanislav RUSZ. Effect of severe plastic deformation process on microstructure and mechanical properties of AlSi/SiC composite.
Journal of Materials Research and Technology. San Diego: Elsevier, 2022,
17(1), s. 948-960. ISSN 2238-7854.
[Detail] SNOPIŃSKI, Przemysław, Augustine Nana Sekeyi APPIAH, Ondřej HILŠER a Michal KOTOUL. Investigation of Microstructure and Mechanical Properties of SLM-Fabricated AlSi10Mg Alloy Post-Processed Using Equal Channel Angular Pressing (ECAP).
Materials. MDPI Open Access Publishing, 2022,
15(22), s. 1-14. ISSN 1996-1944.
[Detail] SNOPIŃSKI, Przemysław, Anna WOZNIAK, Dariusz LUKOWIEC, Krzysztof MATUS, Tomasz TAŃSKI, Stanislav RUSZ a Ondřej HILŠER. Evolution of Microstructure, Texture and Corrosion Properties of Additively Manufactured AlSi10Mg Alloy Subjected to Equal Channel Angular Pressing (ECAP).
Symmetry. MDPI Open Access Publishing, 2022,
14(4), s. 1-19. ISSN 2073-8994.
[Detail] RUSZ, Stanislav, Ondřej HILŠER, Vladislav OCHODEK, Lubomír ČÍŽEK, Martin KRAUS, Vratislav MAREŠ, Adam GRAJCAR a Jiří ŠVEC. EFFECT OF SEVERE PLASTIC DEFORMATION ON MECHANICAL AND FATIGUE BEHAVIOR OF MEDIUM-C SHEET STEEL.
Journal of Mining and Metallurgy. Bělehrad: Univerzitet u Beogradu, 2020,
56(2), s. 161-170. ISSN 1450-5339.
[Detail] SNOPIŃSKI, Przemysław, Tomasz TAŃSKI, Klaudiusz GOŁOMBEK, Stanislav RUSZ, Ondřej HILŠER, Tibor DONIČ, Paweł NUCKOWSKI a Marcin BENEDYK. Strengthening of AA5754 Aluminum Alloy by DRECE Process Followed by Annealing Response Investigation.
Materials. MDPI Open Access Publishing, 2020,
13(2), s. 1-14. ISSN 1996-1944.
[Detail] DUTKIEWICZ, Jan, Stanislav RUSZ, Ondřej HILŠER, Tomasz TAŃSKI, Wojciech BOREK, Maciej SZLEZYNGER, Piotr BOBROWSKI a Wojciech MAZIARZ. Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM.
International journal of materials research. Hanser, 2019,
110(1), s. 24-31. ISSN 1862-5282.
[Detail] RUSZ, Stanislav, Ondřej HILŠER, Vladislav OCHODEK, Radek ČADA, Jiří ŠVEC a Pavel SZKANDERA. Influence of SPD Process on Low-Carbon Steel Mechanical Properties.
MM Science Journal. MM Publishing, 2019,
12(2), s. 2910-2914. ISSN 1803-1269.
[Detail] DUTKIEWICZ, Jan, Stanislav RUSZ, Dariusz KUC, Ondřej HILŠER, Piotr BOBROWSKI a Bogusz KANIA. Microstructure and texture changes of MgLiAl alloys composed of α or α + β phases after twist channel angular pressing (TCAP).
Archives of Metallurgy and Materials. Polish Academy of Sciences, 2018,
63(4), s. 1827-1835. ISSN 1733-3490.
[Detail] MICHALSKI, Jakub, Jakub TILL, Jana PETRŮ, Stanislav RUSZ, Ondřej HILŠER a Jiřina VONTOROVÁ. AZ31 magnesium alloy subjected to severe plastic deformation at different temperatures: Microstructure and hardness.
IOP Conference Series: Materials Science and Engineering. Volume 385. Institute of Physics, 2018,
461(1), s. 1-6. ISSN 1757-8981.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Pavel SZKANDERA, Lubomír ČÍŽEK, Martin KRAUS, Jan DŽUGAN a Wojciech MAZIARZ. Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation.
Metals. MDPI Open Access Publishing, 2018,
8(10), s. 1-16. ISSN 2075-4701.
[Detail] DUTKIEWICZ, Jan, Piotr BOBROWSKI, Stanislav RUSZ, Ondřej HILŠER, Tomasz A. TANSKI, Wojciech BOREK, Marek LAGODA, Pawel OSTACHOWSKI, Pawel PALKA, Grzegorz BOCZKAL, Dariusz KUC a Tomasz MIKUSZEWSKI. Effect of Various SPD Techniques on Structure and Superplastic Deformation of Two Phase MgLiAl Alloy.
Metals and Materials International. Soul: Korean Institute of Metals and Materials, 2018,
24(5), s. 1077-1089. ISSN 1598-9623.
[Detail] RUSZ, Stanislav, Ondřej HILŠER, Stanislav TYLŠAR, Lubomír ČÍŽEK, Tomasz TAŃSKI a Wojciech MAZIARZ. The influence of severe plastic deformation process on structure and properties of AZ 31 alloy after selected heat treatment.
Solid State Phenomena. Volume 258. Trans Tech Publications, 2018,
275(1), s. 134-146. ISSN 1012-0394.
[Detail] DUTKIEWICZ, J.M., Stanislav RUSZ, D. KUC, Ondřej HILŠER, P. PAŁKA a G. BOCZKAL. Superplastic deformation of two phase MgLiAl alloy after TCAP pressing.
Acta Metallurgica Slovaca. Technical University of Košice, 2017,
23(3), s. 215-221. ISSN 1335-1532.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, W MAZIARZ, J. DUTKIEWICZ, T. TAŃSKI, P. SNOPIŃSKI a J DŽUGAN. Structure and properties of AZ31 magnesium alloy after combination of hot extrusion and ECAP.
Acta Metallurgica Slovaca. Technical University of Košice, 2017,
23(3), s. 222-228. ISSN 1335-1532.
[Detail] DUTKIEWICZ, Jan, Stanislav RUSZ, Wojciech MAZIARZ, Wojciech SKUZA, Dariusz KUC a Ondřej HILŠER. Modification of Microstructure and Properties of Extruded Mg–Li–Al Alloys of α and α β Phase Composition using ECAP Processing.
Acta Physica Polonica A. Polish Academy of Sciences, 2017,
131(5), s. 1303-1306. ISSN 0587-4246.
[Detail] SNOPIŃSKI, Przemysław, Tomasz TAŃSKI, Ondřej HILŠER a Adam LUBOS. Effect of ECAP process on structure and hardness of AlMg3 aluminium alloy.
Archives of Materials Science and Engineering. International OCSCO World Press, 2017,
84(2), s. 79-85. ISSN 1897-2764.
[Detail] ČÍŽEK, Lubomír, Stanislav RUSZ, Ondřej HILŠER, Romana Ewa SLIWA, Dariusz KUC, Tomasz TAŃSKI a Tkocz MAREK. Microstructure and properties of selected magnesium-aluminum alloys prepared for spd processing technology.
Archives of Metallurgy and Materials. Polish Academy of Sciences, 2017,
62(4), s. 2365-2370. ISSN 1733-3490.
[Detail] RUSZ, Stanislav, Michal SALAJKA, Jan DŽUGAN, Ondřej HILŠER, Josef BOŘUTA, Martin PASTRŇÁK a Jiří ŠVEC. Development of geometry of forming tools for extrusion of strip sheet by SPD process.
IOP Conference Series: Materials Science and Engineering. Volume 179. Institute of Physics, 2017,
179(1), s. 1-11. ISSN 1757-8981.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Tomasz TAŃSKI, Przemysław SNOPIŃSKI, Jan DŽUGAN a Martin KRAUS. Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing.
IOP Conference Series: Materials Science and Engineering. Volume 179. Institute of Physics, 2017,
179(1), s. 1-7. ISSN 1757-8981.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Wojciech MAZIARZ, Robert CHULIST, Jan DUTKIEWICZ, Lubomír ČÍŽEK, Martin KRAUS a Tomasz TAŃSKI. Grain refinement of AZ61 alloy after ECAP processing.
Materials science forum. Volume 891. Trans Tech Publication Ltd, 2017,
891(1), s. 372-376. ISSN 0255-5476.
[Detail] TAŃSKI, Tomasz, Przemysław SNOPIŃSKI a Ondřej HILŠER. Microstructure and mechanical properties of two binary Al-Mg alloys deformed using equal channel angular pressing.
Materialwissenschaft und Werkstofftechnik. Wiley-VCH, 2017,
48(5), s. 439-446. ISSN 0933-5137.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Lucie KREJČÍ a František ŠPALEK. Grain refinement of extruded AZ31 magnesium alloy by ECAP process.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2017,
63(1), s. 31-37. ISSN 1210-0471.
[Detail] ŠVEC, Jiří, Stanislav RUSZ, Ondřej HILŠER, Vladislav OCHODEK a Lucie KREJČÍ. Mechanical properties of steel DC01 formed by DRECE method.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2017,
63(1), s. 63-72. ISSN 1210-0471.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Radek ČADA, Michal SALAJKA a Jan DUTKIEWICZ. Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys.
Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2016,
62(1), s. 25-37. ISSN 1210-0471.
[Detail] RUSZ, Stanislav, Lubomír ČÍŽEK, Vít MICHENKA, Jan DUTKIEWICZ, Michal SALAJKA, Ondřej HILŠER, Stanislav TYLŠAR, Jan KEDROŇ a Marcel KLOS. New Type of Device for Achievement of Grain Refinement in Metal Strip.
Advanced Materials Research. Trans Tech Publication Ltd, 2015, 1127, s. 91-97. ISSN 1662-8985.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Michal SALAJKA a Lubomír ČÍŽEK. Evaluation of the deep-drawing steel sheets processed by DRECE device.
Archives of Materials Science and Engineering. International OCSCO World Press, 2015,
68(1), s. 31-35. ISSN 1897-2764.
[Detail] RUSZ, Stanislav, Andrzej KŁYSZEWSKI, Michal SALAJKA, Ondřej HILŠER, Lubomír ČÍŽEK a Marcel KLOS. Possibilities of Application Methods Drece in Forming of Non-Ferrous Metals.
Archives of Metallurgy and Materials. Polish Academy of Sciences, 2015,
60(4), s. 3011-3016. ISSN 1733-3490.
[Detail] SZKANDERA, Pavel, Stanislav RUSZ, Rostislav ZABYSTRZAN, Jiří ŠVEC, Ondřej HILŠER, Martin PASTRŇÁK a Radim KUROWSKI. INFLUENCE OF DRECE METHOD ON MECHANICAL PROPERTIES OF DIFFERENT LOW CARBON STEEL. In:
METAL 2021 : conference proceedings : 30th Anniversary International Conference on Metallurgy and Materials : May 26 - 28, 2021, Brno, Czech Republic, EU. Ostrava: Tanger, 2021. s. 211-216. ISBN 978-80-87294-99-4.
[Detail] PASTRŇÁK, Martin, Ondřej HILŠER, Stanislav RUSZ, Vladislav REŠKA, Pavel SZKANDERA a Rostislav ZABYSTRZAN. EFFECT OF PROCESSING ROUTE ON MICROSTRUCTURE AND MICROHARDNESS OF LOW-CARBON STEEL SUBJECTED TO DRECE PROCESS. In:
METAL 2021 : conference proceedings : 30th Anniversary International Conference on Metallurgy and Materials : May 26 - 28, 2021, Brno, Czech Republic, EU. Ostrava: Tanger, 2021. s. 323-328. ISBN 978-80-87294-99-4.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Martin PASTRŇÁK a Rostislav ZABYSTRZAN. Tensile properties and microhardness evolution in medium carbon sheets subjected to continuous SPD process. In:
METAL 2020 : 29th International Conference on Metallurgy and Materials : conference proceedings : May 20-22, 2020, Brno, Czech Republic, EU. Ostrava: Tanger, 2020. s. 339-343. ISBN 978-80-87294-97-0.
[Detail] HILŠER, Ondřej, Przemysław SNOPIŃSKI, Stanislav RUSZ, Tomasz TAŃSKI, Wojciech MAZIARZ, Katarzyna STAN-GŁOWIŃSKA a Miroslav GREGER. Thermal stability of severely deformed AlMg3 sheets. In:
METAL 2020 : 29th International Conference on Metallurgy and Materials : conference proceedings : May 20-22, 2020, Brno, Czech Republic, EU. Ostrava: Tanger, 2020. s. 344-349. ISBN 978-80-87294-97-0.
[Detail] HILŠER, Ondřej, P. SNOPINSKI, Stanislav RUSZ, T. TANSKI, W. MAZIARZ, K. STAN-GLOWINSKA a Miroslav GREGER. Thermal stability of serely deformed AlMg3 sheets. In:
METAL 2020 : 29th International Conference on Metallurgy and Materials : conference proceedings : May 20-22, 2020, Brno, Czech Republic, EU. Ostrava: Tanger, 2020. s. 344-349. ISBN 978-80-87294-97-0.
[Detail] RUSZ, Stanislav, Jiří ŠVEC, Ondřej HILŠER, Rostislav ZABYSTRZAN, Vratislav MAREŠ a Marcel KLOS. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In:
METAL 2019 : 28th International Conference on Metallurgy and Materials : abstracts : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 1962-1967. ISBN 978-80-87294-92-5.
[Detail] RUSZ, Stanislav, Ondřej HILŠER, Pavel SZKANDERA, Rostislav ZABYSTRZAN, Jiří ŠVEC, Vratislav MAREŠ a Marcel KLOS. Influence of severe plastic deformation process on mechanical properties of low carbon steel. In:
METAL 2019 : conference proceedings : peer reviewed : 28th International Conference on Metallurgy and Materials : May 22nd-24th 2019, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2019. s. 473-476. ISBN 978-80-87294-92-5.
[Detail] ŠVEC, Jiří, Pavel SZKANDERA, Stanislav RUSZ, Ondřej HILŠER a Jana PETRŮ. Refining Structure of Copper by SPD process. In:
IOP Conference Series: Materials Science and Engineering. Volume 461. Bristol: IOP Publishing, 2018. s. nestránkováno. ISBN 0-000-00000-0.
[Detail] RUSZ, Stanislav, Martin KRAUS, Ondřej HILŠER, Jiří ŠVEC, Jan KEDROŇ, Lubomír ČÍŽEK, Tibor DONIČ, Tomasz TAŃSKI a Lucie KREJČÍ. Increasing the quality of DC01 steel by drece method. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 527-532. ISBN 978-80-87294-79-6.
[Detail] HILŠER, Ondřej, František ŠPALEK, Stanislav RUSZ, Dariusz KUC, Eugeniusz HADASIK a Przemysław SNOPIŃSKI. Lithium containing AZ31 magnesium alloy processed by ECAP. In:
METAL 2017: conference proceedings : 26th International Conference on Metallurgy and Materials : (reviewed version) : May 24th-26th 2017, Hotel Voroněž I, Brno, Czech Republic, EU. Ostrava: Tanger, 2017. s. 1738-1745. ISBN 978-80-87294-79-6.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Tomasz TAŃSKI, Przemysław SNOPIŃSKI a Jan DŽUGAN. Grain Refinement of AZ61 Magnesium Alloy by ECAP Process. In:
METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 386-391. ISBN 978-80-87294-67-3.
[Detail] RUSZ, Stanislav, Michal SALAJKA, Ondřej HILŠER, Stanislav TYLŠAR, Jan KEDROŇ, Josef BOŘUTA a Martin PASTRŇÁK. INFLUENCE OF SPD PROCESS ON MECHANICAL PROPERTIES IN LOW CARBON STEEL. In:
METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger, 2016. s. 475-481. ISBN 978-80-87294-67-3.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Tanski TOMASZ, Snopinski PRZEMYSLAW a Dzugan JAN. GRAIN REFINEMENT OF AZ61 MAGNESIUM ALLOY BY ECAP PROCESS. In:
METAL 2016: conference proceedings : (reviewed version) : 25th Anniversary International Conference on Metallurgy and Materials : May 25th-27th 2016, Hotel Voronez I, Brno, Czech Republic, EU. Ostrava: Tanger LTD, 2016. s. 386-391. ISBN 978-80-87294-67-3.
[Detail] HILŠER, Ondřej, Stanislav RUSZ, Stanislav TYLŠAR, Jan KEDROŇ a Michal SALAJKA. Forming of Mg alloys by ECAP process with modifying tool geometry. In:
Technological Forum 2016 : 7th international technical conference : Hotel Červenohorské sedlo, Červenohorské sedlo, Czech Republic : 28.-30.6.2016. Jaroměř: Jan Kudláček, 2016. s. 47-53. ISBN 978-80-87583-17-3.
[Detail] RUSZ, Stanislav, Michal SALAJKA, Ondřej HILŠER, Martin PASTRŇÁK, Karel MALANÍK a Tomasz TAŃSKI. GRAIN REFINEMENT IN LOW CARBON STEEL BY NEW FORMING METHOD WITH USE SPD PROCESS. In:
In-Tech 2015 : proceedings of International Conference on Innovative Technologies : Dubrovnik, 09-11.09.2015. Rijeka: Tiskara Sušak, 2015. s. 358-361. ISBN 0-000-00000-0.
[Detail]