Skip to main content
Skip header

Cutting Tools

Type of study Bachelor
Language of instruction Czech
Code 346-0302/05
Abbreviation Nást
Course title Cutting Tools
Credits 5
Coordinating department Department of Machining, Assembly and Engineering Metrology
Course coordinator prof. Dr. Ing. Ivan Mrkvica

Subject syllabus

Lecture program

1. Materials og cutting tools - analysis, basic parameters, application field.
2. Cutting geometry - definition, geometrical and analytical solution of cutting geometry, work geometry.
3. Turning tools - soldered tool problems.
4. Turning tools - construction with cutting tip, form turning tools.
5. Tools for holes - drills for short and deep holes, tools for boring operation, broaching and push broaking tools.
6. Milling cutters - division, construction, geometry, application.
7. Cutter heads - construction with regard for its treliability.
8. Tools for thread production.
9. Tools for involute gearing production.

Practice program + individual student´s work

1. Cutting materials - analysis, head treatment, practically exhibits, video.
2. Analytical and geometrical solution of cutting geometry - Programme 1.
3. Calculation of normal stress in soldering tip from sintered carbide. Test 1.
4. Dependability checking of tools with cutting sintered carbide tip. Programme 2. Test 2.
5. Driling tools - geometry, sharpening, modifications for cutting efficiency increasing.
6. Milling cutters - geometry, form-relieved cutter. Test 3.
7. Cutter heads - division, calculations by angle of cutter head. Test 4.
8. Taps - types, chip division, construction modification of taps.
9. Milling cutters for spur gear production, Shaper and shaver tools for spur gear production. Test 5.



E-learning

BRYCHTA, J.; ČEP, R.; SADÍLEK, M.; PETŘKOVSKÁ, L.; NOVÁKOVÁ, J. Nové směry v progresivním obrábění [online]. Ostrava : Fakulta strojní VŠB-Technická univerzita Ostrava, 2007 [cit. 2009-1-8]. Scripta electronica. s. 251. Dostupné na WWW:<http://www.elearn.vsb.cz/archivcd/FS/NSPO/>. ISBN 978-80-248-1505-3 .

Literature

[1] AB SANVIK COROMANT. Modern Metal Cutting. Sandviken: Sandvik Coromant, Technical Editorial dept., 1994. ISBN 91-972299-0-3.
[2] BUNSHAH, R.F. Handbook of Hard Coating. Noyes Publication/William Publishing, N. York: 2001,550 p. ISBN 0-8155-1437-7 .

Advised literature

1] DAVIS, J.R. Tools Materials. ASM Specialy Handbook. ASM International,
Materials Park, 2 nd. ed. Ohio: 1998, 501 p. ISBN 0-8170-545-1.
[2] KALPAKJIAN, S. Manufacturing enginering and technology. Addison – Wesley, Publishing Copany, Inc. 1989. 1199 s.