Syllabus of lectures:
1st Introduction to OS.
2nd Sorting OS, demands on the OS. Characteristic features of design of NC machine tools.
3rd Technological parameters and possibilities of the OS.
4th The main OS drive.
5th Secondary OS drives.
6th Stepped and stepless speed change.
7th Accuracy of work and geometric accuracy of the OS.
8th Straightforward guidance OS.
9th Rolling deposit with the OS.
10th Machining center, unattended OS.
11th Choice of OS and machining methods.
12th Dedicated and modular OS.
13th Control of NC machine tool systems and their programming.
14th Reliability and Technical Diagnostics OS.
Exercise program:
1st Home Exercise - Introduction to OS, demands on the AC, literature.
2nd Program No. 1: Speed and RPM chart gearbox OS.
3rd Work on the program No. 1
4th Work on the program No. 1
5th Work on the program No. 1
6th Work on the No. 1 program and delivered
7th Program No. 2: Measurement of geometric precision of the OS nodes.
8th Evaluation of program No. 2 and his dedication.
9th Program No. 3: Control NC program for machining rotational parts
10th Work on the No. 3 program.
11th Work on the No. 3 program.
12th Work on the No. 3 program.
13th Test subject matter
14th Evaluation of exercise and Graded credi
1st Introduction to OS.
2nd Sorting OS, demands on the OS. Characteristic features of design of NC machine tools.
3rd Technological parameters and possibilities of the OS.
4th The main OS drive.
5th Secondary OS drives.
6th Stepped and stepless speed change.
7th Accuracy of work and geometric accuracy of the OS.
8th Straightforward guidance OS.
9th Rolling deposit with the OS.
10th Machining center, unattended OS.
11th Choice of OS and machining methods.
12th Dedicated and modular OS.
13th Control of NC machine tool systems and their programming.
14th Reliability and Technical Diagnostics OS.
Exercise program:
1st Home Exercise - Introduction to OS, demands on the AC, literature.
2nd Program No. 1: Speed and RPM chart gearbox OS.
3rd Work on the program No. 1
4th Work on the program No. 1
5th Work on the program No. 1
6th Work on the No. 1 program and delivered
7th Program No. 2: Measurement of geometric precision of the OS nodes.
8th Evaluation of program No. 2 and his dedication.
9th Program No. 3: Control NC program for machining rotational parts
10th Work on the No. 3 program.
11th Work on the No. 3 program.
12th Work on the No. 3 program.
13th Test subject matter
14th Evaluation of exercise and Graded credi