Course Unit Code | 346-3005/01 |
---|
Number of ECTS Credits Allocated | 5 ECTS credits |
---|
Type of Course Unit * | Compulsory |
---|
Level of Course Unit * | First Cycle |
---|
Year of Study * | Third Year |
---|
Semester when the Course Unit is delivered | Summer Semester |
---|
Mode of Delivery | Face-to-face |
---|
Language of Instruction | Czech |
---|
Prerequisites and Co-Requisites | Course succeeds to compulsory courses of previous semester |
---|
Name of Lecturer(s) | Personal ID | Name |
---|
| MRK20 | prof. Dr. Ing. Ivan Mrkvica |
Summary |
---|
Subject continues on knowledge, obtained trough technological subjects study
and develops into the deepest knowledge connected with tools construction.
Division of particular lectures is implemented in concordance with methodical
lines and logical sequence (cutting tools materials, cutting tools geometry,
turning tools, tools for holes, draw-through and extruding tools, milling
cutters and milling cutter heads, thread tools, tools for spur gears, module
tools for NC machine tools and centres) from the simpler tools to more
developed tools. In each chapter are named new progressive construction of
tools, attention is paid to their use, servicing and requirements which are
posed on their quality increase. Through study of subject „TOOLS“ students
will familiarize their selves with basic problems concerning cutting tools
drafting, status quo and developing tendencies in this area. |
Learning Outcomes of the Course Unit |
---|
Student get after graduation this subject basic summary about tools they are used by cutting operation. They acquaint with basic of design, influence of cutting geometry on their cutting efficiency and with setting conditions particular tools in term of technic and economy. |
Course Contents |
---|
Lecture program:
1. Materials of cutting tools - analysis, basic parameters, application field.
2. Cutting geometry - definition, geometrical and analytical solution of cutting geometry, work geometry.
3. Turning tools - soldered tool problems.
4. Turning tools - construction with cutting insert, form turning tools.
5. Tools for holes - drills for short and deep holes, tools for boring operation, broaching and push broaking tools.
6. Milling cutters - division, construction, geometry, application.
7. Cutter heads - construction with regard for its treliability.
8. Tools for thread production.
9. Tools for involute gear production.
Practice program + individual student´s work:
1. Cutting materials - analysis, head treatment, practically exhibits, video.
2. Analytical and geometrical solution of cutting geometry - Programme 1.
3. Calculation of normal stress in soldering inert from sintered carbide. Test 1.
4. Dependability checking of tools with cutting sintered carbide inserts. Programme 2. Test 2.
5. Driling tools - geometry, sharpening, modifications for cutting efficiency increasing.
6. Milling cutters - geometry, form-relieved cutter. Test 3.
7. Cutter heads - division, calculations by angle of cutter head. Test 4.
8. Taps - types, chip division, construction modification of taps.
9. Milling cutters for spur gear production, Shaper and shaver tools for spur gear production. Test 5. |
Recommended or Required Reading |
---|
Required Reading: |
---|
AB SANVIK COROMANT. Modern Metal Cutting. Sandviken: Sandvik Coromant, Technical Editorial dept., 1994. ISBN 91-972299-0-3.
BUNSHAH, R.F. Handbook of Hard Coating. Noyes Publication/William Publishing, N. York: 2001,550 p. ISBN 0-8155-1437-7. |
MRKVICA,M. Přípravky a obráběcí nástroje - I.díl. Řezné nástroje,4. vydání, Ostrava, VŠB-TU, 2015, 194s. ISBN 978-80-248-3775-8.
MRKVICA,I. Návody ke cvičení z obráběcích nástrojů - 1. část. 3. vydání, Ostrava: VŠB-TU,2016, 148s. ISBN 978-80-248-3936-3.
AB SANVIK COROMANT. Modern Metal Cutting. Sandviken: Sandvik Coromant, Technical Editorial dept., 1994. ISBN 91-972299-0-3.
BUNSHAH, R.F. Handbook of Hard Coating. Noyes Publication/William Publishing, N. York: 2001,550 p. ISBN 0-8155-1437-7. |
Recommended Reading: |
---|
DAVIS, J.R. Tools Materials. ASM Specialy Handbook. ASM International,
Materials Park, 2 nd. ed. Ohio: 1998, 501 p. ISBN 0-8170-545-1.
KALPAKJIAN, S. Manufacturing enginering and technology. Addison – Wesley, Publishing Copany, Inc. 1989. 1199 s. |
MRKVICA, M. Konstrukce a výroba obráběcích nástrojů. Ostrava, VŠB-TU, 1986, 215s.
ŘASA,J. Výpočetní metody v konstrukci řezných nástrojů. Praha, SNTL, 1986,
464s.
DAVIS, J.R. Tools Materials. ASM Specialy Handbook. ASM International,
Materials Park, 2 nd. ed. Ohio: 1998, 501 p. ISBN 0-8170-545-1.
KALPAKJIAN, S. Manufacturing enginering and technology. Addison – Wesley, Publishing Copany, Inc. 1989. 1199 s. |
Planned learning activities and teaching methods |
---|
Lectures, Tutorials |
Assesment methods and criteria |
---|
Task Title | Task Type | Maximum Number of Points (Act. for Subtasks) | Minimum Number of Points for Task Passing |
---|
Graded credit | Graded credit | 100 (100) | 51 |
Programme No. 1 | Semestral project | 25 | 5 |
Programme No. 2 | Semestral project | 25 | 5 |
Test No. 1 | Written test | 10 | 1 |
Test No. 2 | Written test | 10 | 1 |
Test No. 3 | Written test | 10 | 1 |
Test No. 4 | Written test | 10 | 1 |
Test No. 5 | Written test | 10 | 1 |