Course Unit Code | 347-0523/01 |
---|
Number of ECTS Credits Allocated | 4 ECTS credits |
---|
Type of Course Unit * | Compulsory |
---|
Level of Course Unit * | Second Cycle |
---|
Year of Study * | First Year |
---|
Semester when the Course Unit is delivered | Winter Semester |
---|
Mode of Delivery | Face-to-face |
---|
Language of Instruction | Czech |
---|
Prerequisites and Co-Requisites | There are no prerequisites or co-requisites for this course unit |
---|
Name of Lecturer(s) | Personal ID | Name |
---|
| PIS73 | Ing. Daniel Pišťáček, Ph.D. |
Summary |
---|
Extend knowledges from Machine basics fundamentals.
Clarify of geometrical and dependent tolerances on technical drawings.
Apply accuracy of machine parts, their rules and interpretation on technical drawings.
Solve dimensional circuits in connection with an assembly.
Prepare technical drawings of a weldments, formed and flexible parts. |
Learning Outcomes of the Course Unit |
---|
Extend and update knowledges from Machine basics fundamentals.
Clarify of geometrical and dependent tolerances on technical drawings.
Apply accuracy of machine parts, their rules and interpretation on technical drawings.
Solve dimensional circuits in connection with an assembly.
Prepare technical drawings of a weldments, formed, flexible and plastic parts. |
Course Contents |
---|
1. Update of basic technical drawing rules in machinery.
2. Datums and datum systems. Target datums, added datum symbols.
3. Rules and reading of geometrical tolerances.
4. Dependent tolerances
5. ISO code system for tolerances on linear size. Common tolerances according to ISO 2768.
6. Thermal cutting - GPS and quality tolerances of parts.
7. Accuracy and tolerances of a weldments.
8. Accuracy and tolerances of formed parts.
9. Plastic parts - accuracy and tolerances.
10. Flexible parts - accuracy and tolerances.
11. Bases of GPS standards, matrix model, basic rules according to ISO 8015.
12. Size tolerances - linear and angle sizes.
13. Dimensional circuits.
14. Rules for drawing and dimension of typical machinery parts. |
Recommended or Required Reading |
---|
Required Reading: |
---|
DRASTÍK, František. Přesnost strojních součásti podle mezinárodních norem. Ostrava: Montanex, a.s. 1996.
SHIGLEY, Joseph E., MISCHKE, Charles R. and BUDYNAS, Richard G. Mechanical Engineering Design. 7th ed. New York: McGraw-Hill, 2004. McGraw-Hill series in mechanical engineering. ISBN 0-390-76487-6. |
DRASTÍK, František. Přesnost strojních součásti podle mezinárodních norem. Ostrava: Montanex, a.s. 1996.
SHIGLEY, Joseph E., MISCHKE, Charles R. and BUDYNAS, Richard G. Mechanical Engineering Design. 7th ed. New York: McGraw-Hill, 2004. McGraw-Hill series in mechanical engineering. ISBN 0-390-76487-6. |
Recommended Reading: |
---|
ČSN and ISO actualized standards.
SHIGLEY, Joseph E., MISCHKE, Charles R. and BUDYNAS, Richard G. Mechanical Engineering Design. 7th ed. New York: McGraw-Hill, 2004. McGraw-Hill series in mechanical engineering. ISBN 0-390-76487-6. |
Aktuální normy ČSN a ISO.
SHIGLEY, Joseph E., MISCHKE, Charles R. and BUDYNAS, Richard G. Mechanical Engineering Design. 7th ed. New York: McGraw-Hill, 2004. McGraw-Hill series in mechanical engineering. ISBN 0-390-76487-6. |
Planned learning activities and teaching methods |
---|
Lectures, Tutorials |
Assesment methods and criteria |
---|
Task Title | Task Type | Maximum Number of Points (Act. for Subtasks) | Minimum Number of Points for Task Passing |
---|
Credit and Examination | Credit and Examination | 100 (100) | 51 |
Credit | Credit | 30 (30) | 18 |
Program č.1 | Project | 4 | 0 |
Program č. 2 | Project | 8 | 0 |
Program č.3 | Project | 8 | 0 |
Program č.4 | Project | 10 | 0 |
Examination | Examination | 70 (70) | 21 |
Písemná část zkoušky | Written examination | 40 | 12 |
Ústní část zkoušky | Oral examination | 30 | 9 |